Product

TerraProducts Ltd

Environmentally Friendly
Erosion Control Products

Back to Products Page ::

BonTerra S, Stitched Coir Fibre Erosion Control Blanket
BonTerra S consists of an evenly distributed layer of straw, captured between meshes of Polypropylene (PP) photodegradable or, biodegradable jute. The stitching thread is either synthetic or for the jute mesh version, biodegradable. BonTerra S is available unseeded or pre-seeded. It provides 100 per cent ground coverage.
Stitched with jute netting 2 sides		Recommended Application
		For slopes of.1:3. To prevent soil loss and establish planned vegetation on gentle slopes, in sheltered locations with stable soil conditions and exposed to low density rainfall and water run-off. Suitable for shallow embankments, drainage ditches, balancing ponds, waterways bank protection, landfill, or wherever soil protection and protective vegetation establishment is required.
		Durability
		1 year, depending on site conditions, including temperature, moisture, soil acidity etc.

Stitched with PP netting 2 sides		Weight
		This product can be manufactured to specification. Material weights, dimensions and other technical data are available upon request.
		General
		The range of BonTerra stitched blankets, K / SK / S, can be manufactured with or without integrated seed, mulch material and fertilizer. The pre-seeded products incorporate a biodegradable seed carrier which is stitched to the underside of the blankets.
		Installation
		BonTerra seeded blankets must be laid vertically on steep or longer slopes but may be laid horizontally on short or shallow inclines and must conform closely to the slope geometry. The blankets must not be stretched. Prior to installation, the slope should be cleared of large or loose stones and hollows should be filled, to establish complete soil contact and allow the germinating seeds to successfully root and flourish. 100mm soil depth is recommended to adequately support vegetation. The application of fertilizer is not usually necessary unless the blankets were installed on non-organic subsoil. The blankets should be pinned with 300mm mild steel pins at a recommended pinning average of 3 per square metre, depending on slope steepness. Pre-seeded blankets generally require more pins per square metre than the unseeded versions. Comprehensive installation guidance is available upon request.
		BonTerra Blankets are produced in accordance with the ISO 9001 quality system.